SKF Shredder Pumps SK08CF-208T | AAA Tool and Supply

SKU / Product Info	Quantity
SK08CF-208T Current F.L.A. - 3.5
SK08CF-230T Current F.L.A. - 3.2
SK08CF-460T Current F.L.A. - 1.6
SK08CF-575T Current F.L.A. - 1.3

Quick Overview

Fahrenheit Pumps handles liquids up to 200 degrees F.

Electric Submersible Pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water

The BJM Shredder Pump model SK08CF is not recommended for unscreened sewage. It does not have enough torque to handle solids such as Tampons, Applicators, Sanitary napkins, Paper Towels (bunched), or other similar materials.

BJM Pumps recommend that a 2HP or larger is used in unscreenedsewage.

Choosing the right pump for your particular application is very important. If for any reason you are not familiar with the general rules of sizing a pump or system please contact our Technical Services Department or our nearest distributor for help and guidance.

Simplex Control Panel:

Three Phase control Panel for SK08CF-208 = BJM Part# AP31CH
Three Phase control Panel for SK08CF-230 = BJM Part# AP31CH
Three Phase control Panel for SK08CF-460 = BJM Part# AP31AH
Three Phase control Panel for SK08CF-575 = BJM Part# AP31AH

Duplex Control Panel:

Three Phase control Panel for SK08CF-208 = BJM Part# AP32CH
Three Phase control Panel for SK08CF-230 = BJM Part# AP32CH
Three Phase control Panel for SK08CF-460 = BJM Part# AP32AH
Three Phase control Panel for SK08CF-575 = BJM Part# AP32AH

Note: Seal Minder relay and high temperature floats must be ordered for panels being used with high temperature pumps. Heat sensor connectors are standard on all panels.

Interested in this item or want more information?

Hours: 6am - 5pm

Phone: 800-613-3873

Email: info@aaatool.net

Can't find what you want? Give us a call and we can help you find it.

Details

GENERAL DATA

Max. Flow: Gpm: 95
Max. Head: Ft: 48'
Pump Type: Non Clog Shredder
Discharge Size: 2" NPT-M
Max. Submerged Depth: 65'
Shipping Weight:Lbs: 68

CONSTRUCTION/MATERIAL DATA

Motor Casing: 304SS
Pump Volute: Cast Iron
Strainer / Stand: Cast Iron
Lip Seals & O-Rings: FKM
Rotor Shaft: 304SS
External Hardware: 304SS
Qty. Oil In Seal Chamber: 7.8 U.S. FL. OZ., SHELL FM 32, NSF APPROVED
Qty. Oil In Motor Stator: 32 U.S. FL. OZ., OIL-FILLED W/ SHELL FM 32, NSF APPROVED

ELECTRICAL/MOTOR DATA

Motor Rating: Hp: 1
Motor Rpm: 3450
Motor Insulation Class: R
Motor Service Factor: 1.1
Voltage: 208/230/460/575, 3PH-60 Hz
Motor Protection: Thermal Sensor Switches Embedded in Each Winding Phase
Power Cord: Gage; Length: A.W.G. 16/4; 33', high temp. rated
Maximum Liquid Temperature: 200°F
Seal Minder: STANDARD

The Shredder (SKF) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.

Longer Power Cord – Standard 33ft. power.
304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
More Motor Protection – Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.
Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

Additional Information

Manufacturer: BJM Pumps, LLC

For More Information on the SKF Shredder Pumps SK08CF-208T, [Click Here] to Link to Manufacturer Web Site