Details
GENERAL DATA
Max. Flow: Gpm: 450
Max. Head: Ft: 78'
Pump Type: Open Vane Non Clog
Discharge Size: 4" NPT-F
Max. Submerged Depth: 65'
Shipping Weight:Lbs: 247
CONSTRUCTION/MATERIAL DATA
Motor Casing: 304SS
Pump Volute: Cast Iron
Strainer / Stand: Cast Iron
Lip Seals & O-Rings: FKM
Rotor Shaft: 304SS
External Hardware: 304SS
Qty. Oil In Seal Chamber: 35.5 U.S. FL. OZ., SHELL FM 32, NSF APPROVED
Qty. Oil In Motor Stator: OIL-FILLED W/ SHELL FM 32, NSF APPROVED
ELECTRICAL/MOTOR DATA
Motor Rating: Hp: 7.5
Motor Rpm: 3450
Motor Insulation Class: R
Motor Service Factor: 1.1
Voltage: 208/230/460/575, 3PH-60 Hz
Motor Protection: Thermal Sensor Switches Embedded in Each Winding Phase
Power Cord: Gage; Length: A.W.G. 10/4; 33', high temp. rated
Maximum Liquid Temperature: 200°F
Seal Minder: STANDARD
Electric Submersible Pumps with Single Vane or Double Vane Impellers for Municipal, Industrial and Agricultural Waste-Water
The SF-pumps have non-clog, single vane or double vane impellers designed for high volume and lift performance.
Longer Power Cord – Standard 33ft. power cord.
304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
More Motor Protection – Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.
Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Additional Information
Manufacturer: BJM Pumps, LLC
For More Information on the SF Solids Handling Pumps S55CF-208T,
[Click Here] to Link to Manufacturer Web Site