Details
GENERAL DATA
Max. Flow: Gpm: 700
Max. Head: Ft: 73'
Pump Type: Non Clog Shredder
Discharge Size: 4" NPT-F
Max. Submerged Depth: 65'
Min. Submerged Depth: 22"
Shipping Weight:Lbs: 395
CONSTRUCTION/MATERIAL DATA
Motor Casing: 304 SS
Pump Volute: Cast Iron
Strainer / Stand: Cast Iron
Lip Seals & O-Rings: Buna-N
Rotor Shaft: 304 SS
External Hardware: 304 SS
Qty. Oil In Seal Chamber: 84.5 U.S. FL. OZ.
ELECTRICAL/MOTOR DATA
Motor Rating: Hp: 10
Motor Rpm: 1750
Motor Insulation Class: H
Motor Service Factor: 1.1
Voltage: 230/460/575, 3PH-60 Hz
Motor Protection: Thermal & Amp Overload
Power Cord: Gage; Length: A.W.G. 10/4; 33', SOOW
Maximum Liquid Temperature: 104° F
Seal Minder: Standard/Included
Electric Submersible Pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water
The Shredder (SK) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.
- Longer Power Cord – Standard 33ft. power.
- 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
- Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
- Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Additional Information
Manufacturer: BJM Pumps, LLC
For More Information on the SK Shredder / Cutter Pumps SK75C-230T,
[Click Here] to Link to Manufacturer Web Site