Quick Overview
Interested in this item or want more information?
Hours:
Phone: 800-613-3873
Email: info@aaatool.net
Can't find what you want? Give us a call and we can help you find it.
Details
GENERAL DATA
Max. Flow: Gpm: 977
Max. Head: Ft: 72.8'
Pump Type: Slurry
Strainer Opening: 1.375"
Discharge Size: 6" NPT-M
Discharge Connection: 6" Hose Barb Optional
Max. Submerged Depth: 65'
Shipping Weight:Lbs: 672
CONSTRUCTION/MATERIAL DATA
Motor Casing: Cast Iron
Pump Volute: Ductile Iron with interior hardness coating to 1180 DPH
Impeller - Multi Vane: Hi-Chrome
Lip Seals & O-Rings: Buna - N
Rotor Shaft: 410 SS
External Hardware: 304 SS
Qty. Oil In Seal Chamber: 125 U.S. FL. OZ.
ELECTRICAL/MOTOR DATA
Motor Rating: Hp: 15
Motor Rpm: 1750
Motor Insulation Class: H
Motor Service Factor: 1.15
Voltage: 230/460/575, 3ph-60Hz
Motor Protection: Thermal & Amp Overload
Power Cord: Gage; Length: A.W.G.8/5; 50', SOOW
Maximum Liquid Temperature: 104° F
Seal Minder: Optional
- EVERY KZNR HI-HARD™ slurry pump is constructed with the following abrasive resistant chrome iron components
- Agitator - to fluidize settled solids into a slurry.
- Wear plate - replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
- Semi - open Impeller - to handle abrasive solid concentrations as high as 70% by weight.
- EVERY KZNR HI-HARD slurry pump model is protected by;
- Class H motor insulation - and built in amperage ( FLA ) and temperature overload protection.
- Double silicon carbide mechanical seals - in a separate oil filled seal chamber.
- Heavy Duty Lip Seal – additional protection for the mechanical seals.
-
- Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
- Pump volutes cast from hardened Ductile Iron - 300 Brinnell hardness; twice as abrasive resistant as standard ductile iron.
- EVERY KZNR HI-HARD is a top discharge pump;
- KZNR heavy duty slurry pumps are utility pumps; frequently dragged from one site to another. The KZNR doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
- Top discharge pumps are cooled by pumped liquid - The KZNR slurry pumps can pump a sump or pit down to within "inches" of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
- Top discharge means "SLIM" - even the largest model with a 22.75 inch "waistline" will fit down a manhole with a hose attached.
- The KZNR’s hardened ductile iron volutes - cast with extra thick walls at the point where pumped slurry enters the discharge.
Additional Information
Manufacturer: BJM Pumps, LLC
For More Information on the KZNR Hi-Hard Severe Duty Slurry Pump KZN110R-230T,
[Click Here] to Link to Manufacturer Web Site