The Bullet pumps are ideal for dewatering constructions sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.
Top Discharge – allows for superior cooling of motor and provides a slim line design.
Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic*. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components*.
R400D Special Feature – The mode Up Pumps, will pump down to 1/12 th of an inch. It features a special diaphragm value that prevents water backflow.
TOP DISCHARGE AND PERFORMANCE< br>
The Silver Bullet™ pumps (0.33HP) are ideal for dewatering construction sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.< br>
Recommended accessories
Piggy Back type float switch (115 Volt w/ plug):
- 30’ Cable, 115 Volt = BJM Item # 201050
- 50’ Cable, 115 Volt = BJM Item # 201060
Side Mount Vertical Rod Type Float Switch:
- 30’ Cable, 115 Volt = BJM Item # 201051
Built-In Switch (Permanently attached to pump):
- 33’ Cable (115 Volt) = BJM Item # 201724
- 50’ Cable (115 Volt) = BJM Item # 201725
Simplex Control Panel - (3 mechanical float switches):
- Single Phase Control Panel for R100-115 = BJM Item # 201069
Duplex Control Panel - (4 mechanical float switches):
- Single Phase Control Panel for R100-115 = BJM Item # 201074
Interested in this item or want more information?
Hours:
Phone: 800-613-3873
Email: info@aaatool.net
Can't find what you want? Give us a call and we can help you find it.
Details
GENERAL DATA
Max. Flow: Gpm: 66
Max. Head: Ft: 35'
Pump Type: Top Discharge, Dewatering
Strainer Opening: 0.1875'
Discharge Size: 2" NPT-M
Max. Submerged Depth: 200'
Shipping Weightibs: 33
CONSTRUCTION/MATERIAL DATA
Motor Casing: 304SS
Pump Volute: Cast Iron
Impeller - Multi Vane: Cast Iron
Lip Seals &0-Rings: Buna-N
Rotor Shaft: 304 SS
External Hardware: 304 SS
Oty. Oil In Seal Chamber: 1.35 U.S. FLOZ.
ELECTRICAL/MOTOR DATA
Motor Rating: Hp: 0.5
Motor Rpm: 3450
Motor Insulation Class: F
Motor Service Factor: 1.1
Voltage: 115/230,1PH-60HZ
Current F.La: 7.6
Motor Protection: Thermal Breaker
Power Cord: Gage; Length: A.W.G. 16/3; 33\ STOW
Maximum Liquid Temperature: 104BF
Seal Minder®: Not Available
Additional Information
Manufacturer: BJM Pumps, LLC
For More Information on the R400-115 Top Discharge Dewatering Pumps,
[Click Here] to Link to Manufacturer Web Site